Garage Doors
“Did I close the garage?” See every door at a glance, get a nudge if one's left open, and close it from anywhere.
Lights, locks, garage doors, gates, heat and sprinklers — working together on one screen instead of scattered across eight apps. Independent Home Assistant setup, dashboards and custom-built devices for homes, shops and acreage across Central Oregon.
Start with the one thing that nags at you. Add the rest when you're ready — it all ends up on the same screen.
“Did I close the garage?” See every door at a glance, get a nudge if one's left open, and close it from anywhere.
Lights that come on when you walk in, dim in the evening, and switch off when the house empties. Bulbs and plug-in dimmers need no wiring; in-wall switches do.
Thermostats, mini-splits, pellet stoves and temperature sensors in every room, shop and pump house — with freeze alerts.
Know the front door is locked without turning the car around. Lock up from your phone and see who came and went.
Every brand you own on a single screen — phone, tablet or wall panel — laid out for how your household actually lives.
Phone alerts that arrive in seconds, not minutes. Gate opened, freezer warming, door left open — you hear about it first.
A $20 sensor under the sink or in the crawlspace is cheap insurance, especially for cabins and second homes.
See who's at the door from the same screen as everything else: a live view on the dashboard and a snapshot on your phone when the bell rings.
See what's drawing power and catch the heater that never shut off. Smart plugs just plug in; whole-home monitors go inside the breaker panel.
Schedules that respect watering days, skip after rain, and remind you about blowout before the first hard freeze.
The house knows which rooms are occupied and who's home, so lights, heat and even the dashboard adjust on their own.
Open, latch and monitor a driveway gate from the house or the highway — even one a mile past the reach of your Wi-Fi.
Illustrative dashboard — yours is laid out around your home.
Most homes collect an app per brand. Home Assistant pulls them into one dashboard, so the garage, the locks, the lights and the thermostat are all one glance away.
Have MyQ on a LiftMaster or Chamberlain opener? MyQ doesn't let outside apps in, so I go around it with a local sensor or controller. Details in the FAQ.
Illustrative — rooms light up as someone moves through the house.
Motion sensors turn the lights off while you're still reading. Presence sensors know you're sitting there — and that changes what a home can do without being asked.
A freezer that quits, a fridge door left ajar, a pump house sliding toward freezing. Small wireless sensors catch it while there's still time to do something about it.
Central Oregon is hard on houses. Thirty-degree swings, pipes that burst at the thaw, weeks of wildfire smoke, and plenty of homes that sit empty between visits.
Scroll through 24 hours of a house that looks after itself.
Two lawn zones water on alternating days. A “skip the next N days” control counts itself down after rain.
Six motorized blinds go up at sunrise and back down at sunset, shifting with the seasons on their own.
The house tidies up after you. If the garage is still open ten minutes later, your phone asks whether to close it.
A phone notification the moment the driveway gate moves, plus a running count of how many times it opened today.
It also closes below 50°F, and opens again for free cooling when the house is warmer than the air outside.
If a line shuts unexpectedly, bypass valves open back to the pond in about twenty seconds. Nobody has to be standing there.
Only if it's actually closed, and only after you've been far enough away to count as “gone.” It closes itself behind you.
Bright for cooking, warm and dim after nine. Sit still as long as you like — presence sensors don't time out on you.
Doors lock, the garage gets checked, lights go off, and every mini-split follows the master thermostat.
Remotes and keypad are switched off overnight. A departing car can still trigger the exit sensor, so no one is ever locked in.
If the thermostat calls for heat but the room keeps cooling, the pellet stove is power-cycled — up to three tries, then an alert.
* Running at my own place outside Bend today. The rest are the ones people ask for first.
Some problems don't have a product. These are real devices I've designed, programmed and put to work, built on ESP32 boards and ESPHome so they report straight into Home Assistant.
Two small radios link the gate to the house over LoRa, so it shows up in Home Assistant — opening, open, closing, closed — with no Wi-Fi or internet at the gate. This one sits about a football field from the house with signal to spare; the same radios are rated for miles across open country. It's a thin overlay, too: the gate's own remotes, keypad and exit sensor keep working even if my box is unplugged.
Watches line pressure on a 5 HP irrigation pump and opens bypass valves on its own if a line closes. Valve positions are set from the dashboard.
Replaced one-way infrared remotes with always-on touchscreens that show the real room temperature. Blue when cooling, red when heating, in a 3D-printed case.
A Raspberry Pi 5 driving a 7-inch touchscreen as an always-on kitchen dashboard. Running on the bench today; the flush wall mount is the next step.
One controller operates four shop doors and a barn door by pressing the buttons on a spare remote, so the openers are untouched. Tilt sensors report which are really open.
Auto-close, a vehicle sensor, and a night lock that can never trap a car inside. A companion phone app opens the gate on approach.
Six motorized blinds follow sunrise and sunset from a controller tucked inside a recycled smoke-alarm case on the ceiling.
Reads a home battery bank over Bluetooth with no cloud account, starts the charger below 50%, and sends an alert if charging fails.
You should know the limits before we talk, not after.
I'm not a licensed electrician, and I don't work on household power. Anything on your home's 120/240-volt wiring — in-wall smart switches and dimmers, relays tucked behind a switch or in an electrical box (Shelly or any other brand), hardwired outlets, energy monitors inside the breaker panel — must be installed by you, the homeowner (where Oregon law allows), or by a licensed electrician. I design the system, help you choose the right hardware, and configure everything once it's safely in place. Plenty of good automation never opens an electrical box: smart bulbs, plugs, sensors, cameras and battery-powered locks cover a lot of ground.
Cameras are easy to put up and good on a dashboard — a live view, a snapshot when the doorbell rings. Home Assistant isn't a polished video recorder, though, and cloud brands like Ring, Blink and Nest only share what their makers allow. Scrubbing through recordings usually stays in the camera's own app.
MyQ, the app behind LiftMaster and Chamberlain openers, shut outside apps out in 2023, so there's no one-click MyQ connection. The fix is local: a tilt sensor for “is it open?”, or a small controller at the opener for open and close. Which one fits depends on your opener's age — the newest models are the most restrictive.
Most do. A few lock features behind their own cloud, and battery-powered gadgets are often limited. I'll check what you own before you spend a dollar, and tell you plainly when something isn't worth integrating.
Start small. One annoying problem solved is a better first project than a whole-house overhaul.
A short call or a walk-through. You tell me what bugs you and what you already own; I tell you what's realistic and what it's likely to cost.
A written plan with a specific shopping list. You buy the hardware yourself and own all of it. Anything on household power is flagged for you or your electrician.
I configure Home Assistant, build your dashboards and automations, put the app on your phones with secure remote access, and show you how to change things yourself.
I'm a software engineer living on acreage outside Bend, where Home Assistant runs the house, a shop, a barn, a driveway gate, a pump house and the irrigation. When there's no product for a job, I build one — and when a device's own app is the weak link, I've written the integration myself.
I started doing this for friends and neighbors, and I'd like to find out who else in Central Oregon could use the help. You get one person who answers the phone, explains things in plain English, and leaves you with a system you own and can change.
On-site visits in Bend and the surrounding towns in Deschutes, Crook and Jefferson counties. Planning, dashboards and troubleshooting can also be done remotely.
Home Assistant is free, open-source smart home software that runs on a small hub in your house and connects devices from different brands into one app. It puts local control and privacy first, and it's governed by a non-profit foundation rather than a company selling subscriptions.
For most people, yes. To check on the house from your phone when you're away, or to get an alert while you're at work, the house needs an internet connection. What doesn't depend on it: automations, schedules and the dashboard on your home Wi-Fi keep running through an outage, as long as your devices connect locally (Zigbee, Z-Wave, Matter and many Wi-Fi devices). Cloud-only brands such as Ring and Nest stop responding until the internet is back.
The software is free, and I don't sell monitoring contracts. Reaching your home from your phone does need a secure link back to the house: Home Assistant offers its own at about $6.50 a month, or I can host a private, encrypted one for you. We'll go over the options and any cost up front.
Usually. Home Assistant supports well over a thousand brands, including Philips Hue, ecobee, Reolink, Shelly, Ring and Nest. A few brands limit what outside apps can do, so I check your devices before you spend anything.
Not through MyQ itself. MyQ is the app behind LiftMaster and Chamberlain openers, and in 2023 its maker blocked outside apps such as Home Assistant. The reliable route is local: a tilt sensor that reports whether the door is open, or a small controller at the opener for open and close. Your MyQ app keeps working alongside. Which option fits depends on the age and model of your opener; the newest openers are the most limited, and a sensor-only setup works on all of them, including older openers that never had MyQ.
It depends on the size of the job, so I quote after a free consult. Hardware starts with a hub at roughly $200, and sensors, plugs and switches are added as you need them. You buy the hardware directly and own all of it.
Your data stays on the hub in your home by default rather than on a vendor's servers. Remote access is encrypted, and you choose what, if anything, is reachable from the internet. Backups, updates and strong sign-in are part of every setup.
Yes, as long as the house has internet. The phone app reaches your home over a private, encrypted link — I can set that up and host it for you, with no ports opened on your router — and it can send alerts such as “the garage door has been open for ten minutes” with a button to close it.
Not for most of it. Hubs, sensors, smart bulbs, plug-in devices, cameras, battery locks and all of the software never touch household power. Anything on your home's 120/240-volt wiring — an in-wall smart switch, a relay in an electrical box, a monitor inside the breaker panel — must be installed by you as the homeowner (where Oregon law allows) or by a licensed electrician. I'm not an electrician and don't work on household power.
Yes. Tune-ups, migrations, dashboard design, Zigbee troubleshooting, notification fixes and custom ESPHome devices are a core part of what I do.
The garage you can't stop wondering about. The cabin you worry over all winter. The five apps. Send a note and I'll reply with what's realistic — no pressure, no sales pitch.